Pipe & Well Abandonment · Clark County · Washington

Pipe & Well Abandonment in Vancouver, WA

Vancouver pipe, culvert, tank and well fills, pumped with grout, flowable fill or cellular concrete from truck-mounted line pumps with self-contained water.

Get an Abandonment Quote (971) 219-5358

What we fill in Vancouver

Common abandonment work around Vancouver (Portland Metro):

Utility conduit and culvert fills. Retired conduits and culverts get filled with grout, flowable fill or cellular concrete pumped in from one end.
Underground tanks and vaults. Tanks and vaults taken out of service can be filled in place with pumped flowable fill or cellular concrete.
Well fills. We pump grout or fill material for the well driller or contractor handling a well decommissioning.
Abandoned sewer and storm lines. Old sewer laterals, storm pipe and utility lines left in place under streets, yards and lots are commonly filled solid so they can't collapse or carry water.

Fill materials

Grout. A cement grout pumped through line fills pipes, cells and voids solid.
Flowable fill / CLSM. Controlled low-strength material is a fluid, self-leveling fill that flows down long pipe runs and can be dug out later if needed.
Cellular concrete. Lightweight foamed concrete that fills large voids, long pipe runs and annular spaces.

We pump the grout or fill material. The well driller or contractor handling the decommissioning is responsible for permits and any state requirements.

Reaching the fill point

Abandonment work is usually about distance: the open end of the pipe, the vault or the wellhead is rarely next to the road. We run line from the truck to the fill point so the material goes where it needs to.

Vancouver is part of our Portland Metro core, close to our Milwaukie base, so it's one of our shortest drives. Travel fees still apply on almost every job and are based on distance, and Dispatch will confirm yours with the quote.

Every pump in our fleet is truck mounted, with no trailer pumps. Each truck carries its own self-contained water system. Off-site cleanups are available for an additional charge.

More in Vancouver

Nearby: Portland, OR, Battle Ground, WA, Beaverton, OR, Ridgefield, WA, Camas, WA.

See all pipe & well abandonment areas.

Abandonment FAQ: Vancouver

Do you do pipe and well abandonment in Vancouver, WA?

Yes. Vancouver is in our service area. We pump grout, flowable fill and cellular concrete into abandoned pipes, culverts, tanks and wells. Call Dispatch at (971) 219-5358 or request a quote below.

Are there travel fees for jobs in Vancouver?

Yes. Travel fees apply on almost every job and are based on distance from our Milwaukie base. Dispatch gives you the number with your quote.

Do I need to provide water?

No. Every truck carries its own self-contained water system. Off-site cleanups are available for an additional charge.

Do you handle the well decommissioning permits?

We pump the grout or fill material. The well driller or contractor handling the decommissioning is responsible for permits and any state requirements.

What material do you pump to fill an abandoned pipe?

Grout, flowable fill (CLSM) or cellular concrete, depending on what your project calls for. Tell Dispatch the pipe size, length and access.

Request a Pump Quote

Tell us about your pour. Dispatch will follow up to confirm pump, line length and scheduling. Need it today? Call (971) 219-5358.

Prevailing-wage & certified payroll available
Off-site cleanup available (additional charge)
Travel fees apply on almost every job, based on distance
Prevailing wage rates apply when necessary